Haws 2000S User Manual download pdf (Page 6)

3/14 Model 2000S Page 6 of 8

Maintenance (continued)

 An instructional label is visible when the hinged panel is opened, noting how to replace the filter

(see below).

o NOTE: Water does not need to be shut off to replace the filter cartridge; however, it

should be shut off if the filter head is going to be left without a cartridge installed for a

long period of time.

1. Disconnect the old filter cartridge’s wiring and unscrew the old cartridge.

2. Screw the new cartridge firmly into the filter head and connect the new cartridge’s wiring.

3. The filter status LED should flash green both after the hinged plastic panel is first

closed and when water is dispensing. If it does not, consult the Troubleshooting

Guide.

4. Approximately five gallons of water must be run through the system after the

cartridge is installed in order to remove the loose carbon particles from the filter

cartridge and any air bubbles from the system.

5. Open the unit and examine to assure that there are no leaks; close unit.

Purge Cycle & Cleanliness

 For hygienic purposes, the unit

purges itself briefly if it has not

been used in 24 hours. However, it

is recommended that the drain

basin be regularly cleaned and

disinfected with Clorox

Regular

Bleach – use ¾ cup Clorox

bleach

and mix in 1 gallon of water. Pour

slowly throughout the drain basin

and let stand for 5 minutes. Flush

with water and let air dry.

o To access the drain basin

for cleaning, open the

hinged upper panel and

remove the drain grate (see

right).

 The rest of the unit may be cleaned

with a mild sanitizing cleaner, such

as Clorox

Anywhere

Hard

Surface

Daily Sanitizing Spray.

The Clorox

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Haws 2000S User Manual Page 6

Comments to this Manuals

Related products and manuals for Water equipment Haws 2000S