Haws 2000SMS User Manual

Browse online or download User Manual for Water equipment Haws 2000SMS. Haws 2000SMS User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
3/14 Model 2000SMS Page 1 of 5
No. 2077011 (3)
1455 Kleppe Lane Sparks, NV 89431-6467 (888) 909-4297
website: www.Britahydrationstation.com
QUICK START REFERENCE
© 2014 Haws
®
Corporation – All Rights Reserved
HAWS
®
and other trademarks used
in these materials are the exclusive property of Haws Corporation.
The BRITA trademark and logo are registered trademarks of Brita, LP and used under license by Haws Corporation. All rights
reserved.
Model 2000SMS
Brita
®
Hydration Station
TM
with Lifecycle Control
INSTALLATION GUIDE
NOTE: A Class A ground-fault circuit interrupter
(GFCI) shall be installed in the branch-circuit
supplying power to this unit.
CAUTION! Prior to making any electrical
connections, verify with a voltmeter that power
from the service panel is off.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL, OR REQUIRE REPLACEMENT PARTS, PLEASE CALL:
TECHNICAL SUPPORT:
1-800-766-5612
HOURS OF OPERATION: MON-THURS 7:00a.m. - 4:00p.m PT, FRI 7:00a.m.- 1:00p.m. PT
PARTS LIST: 1 Brita
®
Hydration Station
TM
, 1 filter cartridge, 1 plastic drain basin, 1 hex key, 1
grommet.
RECOMMENDED TOOLS: Phillips screwdrivers, level.
REQUIRED PARTS (NOT SUPPLIED): 1/2” screwdriver stop, 3/8” tubing (to be used for water
supply inlet), 6 1/8” x 3” zinc-plated steel toggle bolts, 6 zinc-plated steel 1/8” fender washers.
PRODUCT INSTALLATION: When installing this product, local, state or federal codes should be
adhered to. This unit is certified for indoor use only.
SUPPLY LINE: Minimum recommended line size is 1/2" IPS with 30-90 PSI (2-6 ATM) flowing
pressure; supply water is to be cold water supply. Intended for municipal water only.
PLUMBING CONNECTIONS: Inlet is 3/8” O.D. push-in type fitting. If a waste is desired, the Haws
6470 retrofit 1-1/4” O.D. waste kit may be used.
ELECTRICAL CONNECTIONS: 115VAC, 60HZ, approx. 0.14A. Unit is equipped with a standard
115VAC plug.
RATED SERVICE FLOW: 0.5 GPM (2725L/day)
OPERATING TEMPERATURE: 35–100
°
F (1.7–37.8
°
C)
OPERATING PRESSURE: 30-90 PSI
FILTER CAPACITY: 2500 gallons (9464L) or 1 year
REPLACEMENT FILTER CARTRIDGE: Brita® Electronic Lifecycle Control Filter Model 6429
Page view 0
1 2 3 4 5

Summary of Contents

Page 1 - INSTALLATION GUIDE

3/14 Model 2000SMS Page 1 of 5 No. 2077011 (3) 1455 Kleppe Lane Sparks, NV 89431-6467 (888) 909-4297 website: www.Br

Page 2 - INSTALLATION PROCEDURE

3/14 Model 2000SMS Page 2 of 5 INSTALLATION PROCEDURE NOTES: 1. This unit is certified for indoor use only. 2. For all plastic pus

Page 3

3/14 Model 2000SMS Page 3 of 5 Step 2: Remove the 4 mounting screws on the outside of the Hydration Station with a Phillips screwdriver (see

Page 4

3/14 Model 2000SMS Page 4 of 5 Step 5: The Hydration Station is supplied with a power cord. If desired, the power cord may be removed an

Page 5

3/14 Model 2000SMS Page 5 of 5 Step 7: Place the Hydration Station onto its mounting bracket and run 3/8” tubing (not supplied) between t

Comments to this Manuals

No comments